This item is available only when your mainboard has JASE1 jumper. Power Management Features Use this menu to specify your settings for power management. Once the equalizer function is enabled, you can choose several preset equalizers for your preference. Keep this equipment away from humidity. Click on the media files in the Play List:

Uploader: Morn
Date Added: 24 June 2008
File Size: 19.36 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15117
Price: Free* [*Free Regsitration Required]

If it detects that the CPU fan is not rotating, the system will etherjet an error message on the screen and halt the boot-up process. You can clear CMOS by shorting pin while the system is off. When the CPU is temporarily suspending or staying in the low load balance, it will restore the default settings instead.

Due to redundancy, the drive capacity of the array is the capacity of the smallest drive. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper.

Notice 2 Shielded interface cables and A. Never pour any liquid into the opening that could damage or cause electrical shock. The setting of the field will automatically return to [Enabled] later.

Can enter and change the settings of the Setup menu.


Meanwhile, there are two functions to protect user’s system from crash. To delete a RAID, use the following steps: Selecting [Disabled] will speed up the boot process. This would prevent unauthorized use of your computer. The different methods are referred to as different RAID levels.

All disk members in a formed disk array are recognized kt808 a single physical drive to the operating system. The second icon indicates the wireless connection. Place the power cord such a way that people can not step on it.

J1 This connector is connected to a 2-pin chassis switch.

MSI KT880 Delta User Manual: Mainboard Specifications

Power Management Features Use this menu to specify your settings for power management. Please turn off the power and unplug the power cord before installing the CPU. The striping block size can be set from 4KB to 64KB. After choosing a hard etherndt, the channel column will be activated. The specification of hard disk drive will show up on the right hand according to your selection.

If BIOS detects a broken RAID 1 array but there is a spare hard drive available for rebuilding the broken array, the spare hard drive will automatically become the mirroring drive.

Mainboard Specifications – Msi KT Delta User Manual [Page 9]

Hardware Setup Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard.


Use one end of the clip to hook the latch of the CPU sliding plate. Resume On KBC The item specifies how the system will be awakened from power saving mode when input signal of the keyboard is detected. KT Delta MS v1. Communicates the key across the network.

When adding or removing expansion cards, make sure that you unplug the power supply first. The channel column will be activated. However, the same type and density memory modules are necessary while using dual-channel DDR, or instability may happen. The data on the mirroring drive may be different from the source drive.

You need to select the MPS version supported by your operating system. Please note that memory is prevented from running faster than this frequency.

Do not leave this equipment in an environment unconditioned, storage temperature above 60 0 C 0Fit may damage the equipment.